Plant Starting Kit, 10'' x 20.5'' Seeding Warm Hydroponic Pad With Digital Thermostat Controller & Thermohygrometer, iPower
Heat mat : Specifications: Size: 10x 20.5 ; Watts: 17.5W +/-2W ; Volt: 120V ; Advantage: 1.Offers more uniform heating. 2. Gently warms root area to improve germination. Increases success of seedlings and cuttings. 3. Warms root area 10-20?F over ambient temperature to improve germination. 4. Provides constant temperature to improve vegetable, plant, herb, and flower seed germination. 5. Waterproof design allows for you to scrub and easier cleaning. 6. Durable, internal insulated wiring for enhanced safety. 7. Heavy duty multi-layer construction. Note: 1. In an extremely cold environment, the temperature of the heating pad may be affected, mind using carefully. 2. Although this heating pad is waterproof, because of its internal circuit structure, it is forbidden to put the heating pad in water to avoid serious consequences. It is recommended that you use a wet towel to clean it when cleaning. Digital thermostat : iPower heating pad thermostat can provide constant customized seed germination, crawling and brewing temperature. It is very suitable for maintaining the required temperature in home breeding and temperature control of reptiles and small pets. Features? 1. Digital temperature controller for heating pad. 2. Provide a constant temperature for the living environment of specific crops. 3. Specifications: 120V / 60HZ / 1000W. 4. LED indicator light and three-hole grounding plug are easy to operate. 5. Convenient LED heating and power indicator light allows you to check the status of the controller even in complete darkness. 6. Can be used with iPower heat mat to make a warm and comfortable growth environment for your reptile even in cold winter. Note: 1. Do not immerse the digital controller or thermostatic sensor probe in liquid or very wet soil. 2. Abnormal warning: If the thermostat displays E1, it means the actual temperature is below 0?C or 32?. If the thermostat displays E2, it means the actual temperature is higher than 60?C or 108?F. If the thermostat displays E3, it means the temperature sensor is not working properly, please reinstall the sensor. 3. That the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. 4. Heat mat thermostat can also be used to control the temperature of many other appliances as long as they dont exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature. Instructions: 1. To adjust the temperature setting, press and hold the SET button for 3 seconds to enter the temperature selection mode. 2. To display in degrees Celsius, press and hold the ?? button for 3 seconds; press and hold the ?? button for 3 seconds to display the temperature in Fahrenheit. 3. Press the ? or ? button to adjust the temperature you want to set. 4. Press the SET button again. This completes the set temperature. 5. When the unit is plugged into an electrical outlet, the Power LED becomes lit, the heat on only when the Output LED is lighted. When the preset temperature is reached, the Output LED will turn off and there is no power to the heat mat. Temperature and humidity monitor : Features: 1.Bination temperature/humidity gauge with large, easy-to-read display. 2. Also registers daily highs and lows for both temperature and humidity. 3. Simple house icon readout for indicating humidity comfort levels. 4. Multiple mounting options include a convenient clip, magnets for attaching to a metal surface like a refrigerator, or you can stand it upright on a tabletop. Specification: Temperature Display Range: 14? to 122??-10?50?) ; Temperature Accuracy: +/- 1?C (+/-2?) ; Temperature Resolution: 0. 1??0. 1?) ; Humidity Display Range: 10%-99%RH ; Humidity Accuracy: +/- 5% ; Tips: 1. Keep the screen clean, avoid to dust, oil build-up etc. 2. Dont drop the product. 3. This product is not waterproof, please keep it away from water. 4. When the display dimmed, please replace the battery in time. 5. LCD screen is a capacitive touch screen, please use finger-pulp instead of nails to touch the keys.